Restaurant Shift Change Checklist: FOH, BOH, Managers
A good restaurant shift change checklist covers cash counts, inventory counts, prep lists, line checks, and incident notes, split by role and by direction: what the closing crew hands the opening crew, what the opening crew owes the closing crew, and separate FOH, BOH, and manager lists for each.
What should be on a restaurant shift change checklist?
Every shift change should cover five things: money, product, equipment, staffing, and anything unusual that happened. That means cash counted and drawer signed over, a walk-in and line check with temps logged, a prep and 86 list for the next crew, who called off or showed up late, and any incident notes from the floor. Cold holding is non-negotiable: the FDA Food Code requires TCS foods to stay at 41°F or below, so an out-of-range walk-in gets flagged before the outgoing crew leaves, not discovered at open. Keep it one page, in both English and Spanish, with initials next to each line. Whether you run it on paper or in an app like Heard, the list stays the same. The next sections break it down by FOH, BOH, and manager, and by which direction the handoff runs.
What does the closing crew need to hand off to the opening crew?
The close-to-open handoff is where most shift change failures start. A missing cash count, an empty walk-in nobody flagged, or an 86 list left on a napkin means the opening crew spends their first hour firefighting instead of getting ready for service.
Cash and drawer close-out
The closing lead counts every drawer, records the drop, and notes any over or short with the amount. If a tip-out or payout happened after the last audit, write it down. The opening manager should be able to reconcile the safe without a phone call.
Walk-in and count sheet handoff
The closing crew fills out the count sheet for the walk-in, reach-ins, and dry storage, and marks anything below par. Note what was prepped that day and how much is left, because the opening cook builds tomorrow's prep list from that number. This is where clipboard counts get lost between shifts; a shared list in one app like Heard keeps the count visible to whoever opens, in English or Spanish.
The 86 list and prep depletion
The 86 list is the single most expensive thing to lose overnight. If the closing crew sold out of the fish special or the last batch of salsa verde, the opener needs to know before the first ticket, not during the Friday rush. Include equipment status too: what was left on to proof or brine, what was shut off, and anything running wrong. One line of notes at close saves a service at open. For the full close, role by role, see the restaurant closing checklist template.
What does the opening crew owe the closing crew?
Most checklists cover close-to-open and skip the reverse. But the night crew's shift is shaped by what the morning crew found and wrote down. Four things matter.
Line check and station setup notes
The opener's line check sets the night up. Temperatures on the walk-in, reach-ins, and lowboys should be logged at open so the closer can compare against the evening reading and catch a failing compressor before it costs a walk-in of product. ServSafe's food safety guidance treats temperature logs as a per-shift documentation duty, not a weekly one. If the fryer or the POS printer was acting up at 10am, the closer needs to know it was already misbehaving.
Front-of-house intel for the night crew
Openers owe the closers the day's picture: reservations and large parties on the book, any VIP notes, what sold out, what is moving slow, and how much carryover prep is left in the walk-in. A server who knows table 12 is an 8-top anniversary dinner runs a different section than one who finds out at the pass.
Write these on the same sheet as the closing list, or keep both in one app so the handoff survives a call-off. We break down how that compares to Homebase for restaurant crews in Heard vs Homebase.
How should FOH and BOH shift change checklists differ?
FOH and BOH hand off different things, so the checklists should be different documents. FOH is about money on the floor and how the room looks. BOH is about food safety and what tomorrow's prep needs. If you run one generic closing list for both sides, one of them always gets shortchanged.
Here's the split:
| Area | FOH checklist | BOH checklist |
|---|---|---|
| Counts | Server drawer cash, tip pool, host stand | Walk-in count sheet, dry storage, bar well |
| Temperature | Ice wells holding, reach-ins closed | Line check with temps logged, walk-in thermometer |
| Reset | Floor reset: chairs down, menus stocked, bathrooms | Line broken down, flat-top and fryers wiped, hood filters checked |
| Handoff notes | Call-offs, posted shift pickups, VIPs booked for open | 86 list, prep list for the morning cook, low-product flags |
| Sidework | Silverware rolled, napkins, condiments restocked | Date labels rotated, trash out, cardboard broken down |
The handoff notes row is where most shift changes fail. A closing server knows the Saturday VIP is coming at open; a closing cook knows the chicken hits its date tomorrow. Both notes need to land on the opening crew's list, in their language, not in a group text. If your schedule and lists live in one app, like Heard, the opening lead reads the handoff note on the same tablet they open with, in English or Spanish.
What manager-specific tasks belong in a shift handoff?
Managers carry items the crews never touch: the safe count, staffing gaps, pending time-off requests, expected vendor deliveries, and any incident reports from the shift. These live in the manager's head or a notebook unless you write them down, which is how a Tuesday call-off becomes a Wednesday no-show.
Cash office and safe verification
Count the safe and the office drawer at handoff, not the next morning. The incoming manager signs for the number, so a discrepancy surfaces while both people are still in the building. Standard cash-handling guidance is consistent on this point: one person counts, a second verifies, and both sign. If your close-to-open handoff skips the safe count, you have no way to know when a shortage happened.
Staffing notes: call-offs, posted shifts, shift cover
Write down who called off, which posted shifts are still open, and whether anyone has claimed a shift cover that needs approval. A pending time-off request should also move forward at handoff, since the next manager is the one who will get asked about it. If your schedule lives in a spreadsheet or group texts, these notes scatter. A shared team list with the posted week and time-off requests in one place, like Heard's schedule, keeps the handoff note attached to the week itself instead of a paper scrap.
How do you handle incident notes and incomplete tasks between shifts?
Use one format for every incident note: what happened, when, what you did, what's still open. "Register drawer $12 short, 10pm, recounted with Dana, manager notified" beats "drawer was off again." Write it in one place the next crew actually reads, not a sticky note on the printer or a group text that scrolls away. Incomplete tasks get a simple rule: carry them forward or hand them off with a name attached. If the closing crew couldn't finish the walk-in count, the note says who's finishing it and by when, because an unowned task is a task that dies. The next morning's manager reads the notes before anything else, then signs off. If a call-off, an 86'd item, or a broken piece of equipment isn't acknowledged at handoff, it didn't get handed off.
How long should a shift change handoff take?
Budget a 15-minute overlap between crews, split roughly 5 minutes for the walk-through and 10 for counts and questions. BOH needs the most time: the walk-in count, prep list updates, and line check notes take longer than a cash drawer recount. FOH can usually cover drawer math, the pass, and reservations in under 5 minutes if the closing list was done properly. Managers should stay the full 15 to sign off on cash, approve time-off requests, and log anything incomplete.
If handoffs regularly run past 15 minutes, the problem is usually the paper count sheet, not the crew. Tools like Jolt's checklist system are built around timed, task-by-task lists, and the same structure works on paper: one list per role, checked off in order, not a single sheet everyone initials.
How can a digital checklist prevent shift change failures?
Paper breaks down in three predictable ways. A count sheet in the walk-in has no timestamp, so nobody knows whether the line check ran at 2pm or was signed off at close without being done. Group texts bury the call-off note under weekend plans, and half your Spanish-speaking crew reads it late or not at all. And when a task is skipped, the clipboard cannot tell you who skipped it.
Digital checklists fix each failure: every item gets a name and a time, tasks can be written once and read in English or Spanish, and a posted schedule reaches each person directly instead of relying on someone scrolling.
Run Heard against the same standard honestly: it puts the schedule, the opening and closing lists, and the count in one app with one team list, bilingual, on web. The same tests apply to Jolt and 7shifts. Whichever you pick, the checklist only works if the handoff items live where your crew already looks.
FAQ
Should the closing or opening crew do the walk-in count?
The closing crew does it. They can see what was prepped that day and how much is left, which is what the opening cook needs to build tomorrow's prep list. The opener verifies it during their line check and logs temperatures at open. If the closer couldn't finish the count, the note names who's finishing it and by when.
What do you do when the closing manager forgets to leave notes?
Treat it as a sign-off failure, not a personality problem. The incoming manager reads the notes before anything else and signs off, so a missing note surfaces immediately while the outgoing manager may still be reachable. If gaps keep happening, make the sign-off line part of the checklist: no initials on the handoff row means the shift isn't closed.
How do you run a shift change checklist with a bilingual crew?
Write the checklist once, in both English and Spanish, with initials next to each line. The list itself stays identical in either language. The point is that a Spanish-speaking closer and an English-speaking opener read the same 86 list and prep notes without a translation step at handoff, when both crews are already halfway out the door.
Do bars need a different shift change checklist than restaurants?
Mostly the same skeleton: cash, product, equipment, staffing, and incident notes. The counts differ, not the structure. Bar lists lean harder on well inventory, keg and bottle counts, tip pool math, and ice well holding temperatures, while kitchen lists carry the walk-in count sheet and prep depletion. Run them as separate documents under the same one-page format.
Is a paper checklist good enough for a small restaurant?
Yes, if it's disciplined: one page, split by role, initialed per line, with a 15-minute overlap so counts happen while both crews are present. Paper's real weaknesses are timestamps and accountability. If you find line checks signed off without times, or call-offs lost in group texts, that's the point where a shared digital list starts paying for itself.

